E-bike booster sensors
- Source:
- Time of issue:2022-10-24 17:25
- Views:
(Summary description)The e-bike booster sensor is used on smart e-bikes and is one of the core components of smart e-bikes. According to the regulations of the European Union and Japan, e-bikes must be pedal-assisted (i.e. smart e-bikes) in order to be classified as a non-motorised vehicle. In China's non-motorised vehicle management, such as Shanghai, Beijing, Shenzhen, Hangzhou and other places require the assembly of a central axle and a booster sensor, in order to achieve the requirements of start-up assistance and power-saving riding. 1. the electric bicycle booster sensor is a national patent technology product with high technical content of electromechanical integration. 2. When riding, the booster sensor detects the pedal torque and sends the detection signal to the PC side of the intelligent controller to synchronously control and adjust the motor speed and output power, so that the riding torque is proportional to the motor output torque, in order to achieve the purpose of doubling the torque. 3. The motor is controlled automatically by the turnbuckle when the pedaling stops; it is safe and energy-saving for leisure and fitness. 4. Effective in increasing the range and extending the life of the battery. The main application of the booster sensor for electric bikes is the detection of the booster signal. It is equipped with a disk of 5-10 magnets, and the sensing distance can reach up to 6.0mm. In China, 5 magnets are generally used, while the 8 piece controller requires special parameters. When the stirrups are rotating, the sensor outputs a low-level pulse and the controller gives the corresponding motor torque according to the pulse frequency. The specific parameters are set by the controller in accordance with the settings! The material used for the disk and the housing is ABS, which has a good toughness and strength at ±40°C. In the existing production enterprises, there are mainly macro ship, crystal Heng and other brands as the mainstream suppliers, its quality has been recognized by the market!
E-bike booster sensors
(Summary description)The e-bike booster sensor is used on smart e-bikes and is one of the core components of smart e-bikes. According to the regulations of the European Union and Japan, e-bikes must be pedal-assisted (i.e. smart e-bikes) in order to be classified as a non-motorised vehicle. In China's non-motorised vehicle management, such as Shanghai, Beijing, Shenzhen, Hangzhou and other places require the assembly of a central axle and a booster sensor, in order to achieve the requirements of start-up assistance and power-saving riding.
1. the electric bicycle booster sensor is a national patent technology product with high technical content of electromechanical integration.
2. When riding, the booster sensor detects the pedal torque and sends the detection signal to the PC side of the intelligent controller to synchronously control and adjust the motor speed and output power, so that the riding torque is proportional to the motor output torque, in order to achieve the purpose of doubling the torque.
3. The motor is controlled automatically by the turnbuckle when the pedaling stops; it is safe and energy-saving for leisure and fitness.
4. Effective in increasing the range and extending the life of the battery.
The main application of the booster sensor for electric bikes is the detection of the booster signal. It is equipped with a disk of 5-10 magnets, and the sensing distance can reach up to 6.0mm. In China, 5 magnets are generally used, while the 8 piece controller requires special parameters.
When the stirrups are rotating, the sensor outputs a low-level pulse and the controller gives the corresponding motor torque according to the pulse frequency. The specific parameters are set by the controller in accordance with the settings! The material used for the disk and the housing is ABS, which has a good toughness and strength at ±40°C.
In the existing production enterprises, there are mainly macro ship, crystal Heng and other brands as the mainstream suppliers, its quality has been recognized by the market!
- Categories:FAQs
- Author:
- Source:
- Time of issue:2022-10-24 17:25
- Views:
The e-bike booster sensor is used on smart e-bikes and is one of the core components of smart e-bikes. According to the regulations of the European Union and Japan, e-bikes must be pedal-assisted (i.e. smart e-bikes) in order to be classified as a non-motorised vehicle. In China's non-motorised vehicle management, such as Shanghai, Beijing, Shenzhen, Hangzhou and other places require the assembly of a central axle and a booster sensor, in order to achieve the requirements of start-up assistance and power-saving riding.
1. the electric bicycle booster sensor is a national patent technology product with high technical content of electromechanical integration.
2. When riding, the booster sensor detects the pedal torque and sends the detection signal to the PC side of the intelligent controller to synchronously control and adjust the motor speed and output power, so that the riding torque is proportional to the motor output torque, in order to achieve the purpose of doubling the torque.
3. The motor is controlled automatically by the turnbuckle when the pedaling stops; it is safe and energy-saving for leisure and fitness.
4. Effective in increasing the range and extending the life of the battery.
The main application of the booster sensor for electric bikes is the detection of the booster signal. It is equipped with a disk of 5-10 magnets, and the sensing distance can reach up to 6.0mm. In China, 5 magnets are generally used, while the 8 piece controller requires special parameters.
When the stirrups are rotating, the sensor outputs a low-level pulse and the controller gives the corresponding motor torque according to the pulse frequency. The specific parameters are set by the controller in accordance with the settings! The material used for the disk and the housing is ABS, which has a good toughness and strength at ±40°C.
In the existing production enterprises, there are mainly macro ship, crystal Heng and other brands as the mainstream suppliers, its quality has been recognized by the market!

How can I knowl if a torque sensor is used on a power-assisted bicycle?

Design and development of a torque sensor based on ebike mid-mount system

What different between torque sensor and cadence sensor ?
Message Board
Navigation
Contact Us
Add : No.58, North Zhangjing Road, Chengxiang Town, Taicang City, Jiangsu Province
Tel :+86-512-53546855
E-mail :xianbing.kang@kclamberele.com
© Copyright 2022 Kclamber Electric Technology Corp 苏ICP备19040012号-1
Powered By:300.cn
© Copyright 2022 Kclamber Electric Technology Corp